= Features =
* '''Print'''
**Black/white and color printer
**'''A3'''/'''A4''' format
**Print from USB device or SD Card (JPG, tiff and PDF format)
**Staple

* '''Scanner'''
**Scan to Email
**Scan to USB device or SD Card

* '''Copies'''
**Black/white and color copies
**Staple
**The password is your birthdate (format : '''ddmmyy''')

= Toner replacement =

Only replace toner when the copier asks for it, '''do NOT replace it because the toner is low'''.

* '''Toners location :'''

The toners are located on the table next the Downstairs copier (RICOHDOWN) :

[[File:Toners_location.png]]

* '''HOW TO replace the toners :'''
[[File:Toner_replacement_manual.png|800px]]
*Open the copier panel
*Remove the old toner (put it in a waste box)
*Shake up and down the new toner 7~8 times
*Remove the cap
*Insert the new toner into the copier

= Installation =

IP Adresses :

*Downstairs : '''10.248.1.7'''
*Upstairs : '''10.248.1.6'''

== Ubuntu 24.04 LTS ==

*Download '''[https://openprinting.org/ppd-o-matic.php?driver=Postscript-Ricoh&printer=Ricoh-IM_C3010&show=0 this file]''' we will need it later.

*Click on '''Activities''' from you desktop :

[[File:Ricoh_ubuntu20_01.png]]

*Type '''printers''' in the search bar then click on '''Printers''' :

[[File:Ricoh_ubuntu20_02.png]]

*Click on '''Add a printer''' :

[[File:Ricoh_ubuntu20_03.png]]

*Type the '''IP address''' on the search bar (Ricoh Downstairs : 10.248.1.7 or Ricoh Upstairs : 10.248.1.6) :

*Select the printer with the following name '''IM-C3010'''.

[[File:ubuntu-printer02.png]]

*Choose '''Printer Details''' under the menu at the right of the printer :

[[File:ubuntu-printer03.png]]

Then rename the printer as needed and click on '''Install PPD File''' and choose the file you download at the beginning of this how to.

[[File:ubuntu-printer04.png]]

*Close the Printer detail and the printers windows.

*Click on '''Activities''' from you desktop :

[[File:Ricoh_ubuntu20_01.png]]

*Type '''printers''' in the search bar then click on '''Printers''' :

[[File:Ricoh_ubuntu20_02.png]]

*Click on the '''printing options''' :

[[File:Ricoh_ubuntu20_06.png]]

*Set '''Installable options''' as following :

[[File:Linux_choose_options.png]]

*You can set the printer as default :

[[File:Ricoh_ubuntu20_08.png]]

*You can also define location in the printer details :

[[File:Ricoh_ubuntu_20_09-bis.png]]

*The printer is now installed.

== Windows 10 ==

*Go to '''Start menu''' and click on '''Settings''' :

[[File:Ricoh_win10_01.png]]

*Select '''Devices''' on the Settings window :

[[File:Ricoh_win10_02.png]]

*Then select '''Printers & scanners''' :

[[File:Ricoh_win10_03.png]]

*Click on '''Add a printer or scanner''' :

[[File:Ricoh_win10_04.png]]

*Click on '''The printer that I want isn't listed''' :

[[File:Ricoh_win10_05.png]]

*Choose '''Add a printer using a TCP/IP address or hostname''' then click on next :

[[File:Ricoh_win10_06.png]]

*Enter the '''IP address''' from the printer (Ricoh Downstairs : 10.248.1.7 or Ricoh Upstairs : 10.248.1.6) :

*Ensure that the option '''Query the printer and automatically select the driver to use''' is enabled.

[[File:Ricoh_win10_07-bis.png]]

*Select '''Do not share this printer''' :

[[File:Ricoh_win10_08.png]]

*Set the printer as default if needed then click on '''Finish''' :

[[File:Ricoh_win10_09.png]]

*The printer is installed.

== Mac OS X ==

'''El Capitan users''' : please install first [http://support.ricoh.com/bb/pub_e/dr_ut_e/0001274/0001274189/V2600/Ricoh_PS_Printers_Vol3_EXP_LIO_2.6.0.0.dmg this driver]

Go to '''System settings/Printers & scanners'''. Click on '''+'''.

[[File:ricohmac_2.png]]

[[File:ricohmac_1.png]]

Click on '''IP''' tab, and fill the fields '''Address''' and '''Name''' like the following screen :

[[File:Ricohmac_2-bis.png]]

Click on '''Add'''. Please wait during the download and installation of the driver. Then, click on '''Add'''.

[[File:ricohmac_3.png]]

Then, go to printer options, '''options''' tab and select the options like the following screen :

[[File:ricohmac_4.png]]

File:Ubuntu-printer04.png

2025-09-17T12:20:54Z

Root:

File:Ubuntu-printer03.png

2025-09-17T12:20:46Z

Root:

File:Ubuntu-printer02.png

2025-09-17T12:20:30Z

Root:

2025-04-18T08:56:09Z

Root: Created page with "= IIHE Matrix Server = Matrix is an open standard and communication protocol for real-time communication. === How to connect === {| class="wikitable" |+ ! colspan="2" | Server address |- | Web client || https://matrix.iihe.ac.be/Element |- | Client address || <code>matrix.iihe.ac.be</code> |} To connect please use your IIHE intranet account. === Element === 200px The IIHE Matrix Server is configured with the Element client how..."

= IIHE Matrix Server =

Matrix is an open standard and communication protocol for real-time communication.

=== How to connect ===

{| class="wikitable"
|+
! colspan="2" | Server address
|-
| Web client || https://matrix.iihe.ac.be/Element
|-
| Client address || <code>matrix.iihe.ac.be</code>
|}
To connect please use your IIHE intranet account.

=== Element ===
[[Image:200px-Element.png|200px]] 
The IIHE Matrix Server is configured with the Element client however [https://matrix.org/ecosystem/clients/ others clients] are available.

=== Security ===

End to end encryption is client based so you need to export and backup your room encryption keys from at least one device '''otherwise there is a risk that you loose your keys to decrypt your messages.'''
==== Secure your room encryption key ====

# Connect to the IIHE Matrix server.
# Export your room encryption key with passphrase from the security menu.
# Save your exported key in a password manager.
# When connecting a new device import your room encryption key.
Using more than one client requires verification to ensure security, it is also recommended to verify other users in-person to prevent identity theft.

[https://en.wikipedia.org/wiki/Matrix_(protocol) More info on Matrix ] | [https://matrix.org/docs/chat_basics/matrix-for-im/ Matrix Documentation] | [https://static.element.io/pdfs/element-user-guide.pdf Element Documentation]

File:200px-Element.png

2025-04-18T08:55:43Z

Root:

Main Page

2025-04-18T08:52:38Z

Root:

Welcome on the IIHE wiki 

= General =

* To contact us: support-iiheATlistserv.vub.be
*[[Printers]]
*[[Wifi]]
*[[Mailing lists]]
*[[Mail]]
*[[Public_web_pages | Create public web pages ]]
*[[Door Labels]]
*[[Rally videoconferencing]]

= Cluster =
* [http://t2bwiki.iihe.ac.be T2B wiki]

= Software =
*[[Scientific software paid by VUB or ULB]]
*[[Installing ROOT on your laptop]]
*[[MacOS ssh keyring]]
*[[Use SSH & X11 forwarding on Windows]]
*[[Use SSH & X11 forwarding on Windows with WSL]]
*[[Use ULB VPN]]
*[[Use VUB VPN]]
*[[Install Windows ATP Antivirus]]
*[[Element]]

= Useful links =

*[http://www.iihe.ac.be IIHE Website]
*[https://www.iihe.ac.be/research/jobs CMS Job Form]
*[https://my.iihe.ac.be Intranet]
*[http://indico.iihe.ac.be Indico]
*[http://t2bwiki.iihe.ac.be T2B Wiki]

Door Labels

2025-03-12T12:05:01Z

Root: /* User Arrival and Departure Procedure */

= User Arrival and Departure Procedure =
* ''' New User Registration'''
** When a new user arrives at our office to create an intranet account, we will immediately print the display.
* ''' User Departure'''
**When a user leaves, the secretaries should notify us so that we can reprint the display (or they can do it themselves via [https://doculbvub.iihe.ac.be/door/index.php this link]).
* ''' User Relocation'''
**If a user changes location, the promoter should inform us so we can print a new display. Printing can also be done directly by the user if they want via [https://doculbvub.iihe.ac.be/door/index.php this link].

2024-04-05T09:07:56Z

Root: Root moved page Installing RooT on your laptop to Installing ROOT on your laptop

1. Look at the pre-requisites on the [https://root.cern/install/dependencies/ CERN website]
:For '''ubuntu''', you need to do:
<pre>sudo apt-get install dpkg-dev cmake g++ gcc binutils libx11-dev libxpm-dev libxft-dev libxext-dev python3 libssl-dev </pre>
:and I strongly suggest installing the optionnal packages too:
<pre>sudo apt-get install gfortran libpcre3-dev xlibmesa-glu-dev libglew-dev libftgl-dev libmysqlclient-dev libfftw3-dev libcfitsio-dev graphviz-dev libavahi-compat-libdnssd-dev libldap2-dev python3-dev python3-numpy libxml2-dev libkrb5-dev libgsl0-dev qtwebengine5-dev nlohmann-json3-dev
</pre>
 
2. Download the latest release from the [https://root.cern/install/ CERN download page]
:a. Click on the latest release
:b. Under '''Binary distributions''' (ie already compiled for a specific platform), download the tar.gz file appropriate to your platform
::* To get your '''ubuntu''' version, type '''cat /etc/lsb-release''' in a terminal

 
3. Extract the compressed tarball:
<pre> tar xzvf root_v6.30.06.Linux-ubuntu22.04-x86_64-gcc11.4.tar.gz </pre>
:This should create a directory called root. You can move this directory wherever you want.

 
4. To use ROOT, you need to source the script '''thisroot.sh''' available in root/bin.
:To make root available anytime from your terminal, edit your .bashrc file, and add the following line at the end (replace ~/root with where you put the extracted directory):
# Enabling RooT
source ~/root/bin/thisroot.sh

Et Voila !

2024-04-03T08:30:33Z

Root: /* Ubuntu 20 LTS */

= Features =
* '''Print'''
**Black/white and color printer
**'''A3'''/'''A4''' format
**Print from USB device or SD Card (JPG, tiff and PDF format)
**Staple

* '''Scanner'''
**Scan to Email
**Scan to USB device or SD Card

* '''Copies'''
**Black/white and color copies
**Staple
**The password is your birthdate (format : '''ddmmyy''')

= Toner replacement =

Only replace toner when the copier asks for it, '''do NOT replace it because the toner is low'''.

* '''Toners location :'''

The toners are located on the table next the Downstairs copier (RICOHDOWN) :

[[File:Toners_location.png]]

* '''HOW TO replace the toners :'''
[[File:Toner_replacement_manual.png|800px]]
*Open the copier panel
*Remove the old toner (put it in a waste box)
*Shake up and down the new toner 7~8 times
*Remove the cap
*Insert the new toner into the copier

= Installation =

IP Adresses :

*Downstairs : '''10.248.1.7'''
*Upstairs : '''10.248.1.6'''

== Ubuntu 20 LTS ==

*Click on '''Activities''' from you desktop :

[[File:Ricoh_ubuntu20_01.png]]

*Type '''printers''' in the search bar then click on '''Printers''' :

[[File:Ricoh_ubuntu20_02.png]]

*Click on '''Add a printer''' :

[[File:Ricoh_ubuntu20_03.png]]

*Type the '''IP address''' on the search bar (Ricoh Downstairs : 10.248.1.7 or Ricoh Upstairs : 10.248.1.6) :

*Select the printer with the following name '''IM-C3000'''.

[[File:Linux_choose_model.png]]

*When prompted for driver choose '''PDF-Ricoh''' then on '''Apply''' :

[[File:Linux_choose_driver.png]]

*Click on the '''printing options''' :

[[File:Ricoh_ubuntu20_06.png]]

*Set '''Installable options''' as following :

[[File:Linux_choose_options.png]]

*You can set the printer as default :

[[File:Ricoh_ubuntu20_08.png]]

*You can also define location in the printer details :

[[File:Ricoh_ubuntu_20_09-bis.png]]

*The printer is now installed.

== Windows 10 ==

*Go to '''Start menu''' and click on '''Settings''' :

[[File:Ricoh_win10_01.png]]

*Select '''Devices''' on the Settings window :

[[File:Ricoh_win10_02.png]]

*Then select '''Printers & scanners''' :

[[File:Ricoh_win10_03.png]]

*Click on '''Add a printer or scanner''' :

[[File:Ricoh_win10_04.png]]

*Click on '''The printer that I want isn't listed''' :

[[File:Ricoh_win10_05.png]]

*Choose '''Add a printer using a TCP/IP address or hostname''' then click on next :

[[File:Ricoh_win10_06.png]]

*Enter the '''IP address''' from the printer (Ricoh Downstairs : 10.248.1.7 or Ricoh Upstairs : 10.248.1.6) :

*Ensure that the option '''Query the printer and automatically select the driver to use''' is enabled.

[[File:Ricoh_win10_07-bis.png]]

*Select '''Do not share this printer''' :

[[File:Ricoh_win10_08.png]]

*Set the printer as default if needed then click on '''Finish''' :

[[File:Ricoh_win10_09.png]]

*The printer is installed.

== Mac OS X ==

'''El Capitan users''' : please install first [http://support.ricoh.com/bb/pub_e/dr_ut_e/0001274/0001274189/V2600/Ricoh_PS_Printers_Vol3_EXP_LIO_2.6.0.0.dmg this driver]

Go to '''System settings/Printers & scanners'''. Click on '''+'''.

[[File:ricohmac_2.png]]

[[File:ricohmac_1.png]]

Click on '''IP''' tab, and fill the fields '''Address''' and '''Name''' like the following screen :

[[File:Ricohmac_2-bis.png]]

Click on '''Add'''. Please wait during the download and installation of the driver. Then, click on '''Add'''.

[[File:ricohmac_3.png]]

Then, go to printer options, '''options''' tab and select the options like the following screen :

[[File:ricohmac_4.png]]

File:Linux choose options.png

2024-04-03T08:26:19Z

Root:

File:Linux choose driver.png

2024-04-03T08:25:58Z

Root:

File:Linux choose model.png

2024-04-03T08:25:29Z

Root:

Use SSH & X11 forwarding on Windows

2023-11-08T13:16:09Z

Root: /* Enabling x11 forwarding */

This page explain the procedure to enable X11 forwarding with SSH on Windows 10 & 11 using Powershell or WSL.

==Powershell==

PowerShell is a task automation and configuration management program from Microsoft, consisting of a command-line shell and the associated scripting language. 
Since version 5.1 Powershell includes open-ssh utility allowing user to use it to connect to SSH without the need of a third party software.

===Prerequities===

*A device running at least Windows Server 2019,Windows 10 (build 1809) or later.
*PowerShell 5.1 or later.

===Creating SSH keypair===

Start Powershell using shortcut windows key + X, then type the following command to create your key :

<pre>ssh-keygen -t ecdsa</pre>

Follow the steps to create your '''ECDSA''' SSH keypair.

Once the key are generated you need to install Xming

===Installing Xming===

Get the installer from [https://sourceforge.net/projects/xming/files/Xming/ this page], then install it.

Note that you can install Xming using Chocolatey :

<pre>choco install xming -y</pre>

Ensure Xming is started before continuing.

===Enabling x11 forwarding===

Start Powershell and paste the following command :

<pre>$env:DISPLAY= 'localhost:0.0'</pre>

(you need to type this command each time before using x11 forwarding.)

Now connect to SSH server using '''-X''' argument :

<pre>ssh username@hostname -XY</pre>

X11 forwarding is now enabled on Powershell.

Use SSH & X11 forwarding on Windows with WSL

2023-06-26T10:23:53Z

Root: Created page with "==WSL== Windows Subsystem for Linux (WSL) is a feature of Windows that allows developers to run a Linux environment without the need for a separate virtual machine or dual booting. There are two versions of WSL: WSL 1 and WSL 2. WSL 1 was first released on August 2, 2016, and acts as a compatibility layer for running Linux binary executables (in ELF format) by implementing Linux system calls on the Windows kernel. ===Prerequisites=== *Windows 10 version 2004 an..."